PRO-TEC X 10W-40
This is a Fully synthetic lubricant based on careFully selected very high quality base oils, which satisfies the highest performance standards for large trucks. It can be used for engines equipped with after treatment systems (Compatible with DPF), in combination with low-sulfur diesel (maximum 50 ppm).
Demander un devis
Applications
Specifically recommended for large truck engines to satisfy the EURO V-standard and suitable for most Euro VI engines. Perfectly compatible with all after-treatment systems and devices (EGR, SCR, DPF, etc.) in combination with low sulfur diesel (max 50 ppm). Can also be used in older diesel engines (Euro II, III, IV). Also suitable for the gas-powered engines (CNG - LPG) of Mercedes-Benz, Iveco and M.A.N.
Caractéristiques
| Unit | Average Value | |
| Density at 15°C | kg/l | 0.857 |
| Viscosity 40°C | mm²/s | 100 |
| Viscosity 100°C | mm²/s | 15.4 |
| Viscosity -25°C | mPas | 4550 |
| Viscosity index | 163 | |
| Flash point COC | °C | 230 |
| Pour point | °C | -33 |
| Total base number | mgKOH/g | 10.3 |
| Sulphated ash content | % | 0.96 |
Emballage
 | 12x1L* | P20191-ARD001 |
 | 4x4L | P20191-ARD004 |
 | 3x5L | P20191-ARD005 |
 | 20L | P20191-ARD020 |
 | 60L | P20191-ARD060 |
 | 210L | P20191-ARD210 |
 | IBC | P20191-ARDIBC |
* Only available per full pallet