GEAR - SP 320
| A synthetic industrial gear oil based on synthesized hydrocarbons (PAO) under addition of special additives the following properties are obtained: - a natural high viscosity index - excellent high and low temperature properties - a very good resistance towards high pressures and shock loads - a high resistance to 'micro-pitting' - a high resistance against corrosion and oxidation - a long service life - a strong reduction of wear |
Aplikacije
This synthetic oil is very suitable for the lubrication of heavy loaded mechanical
gearboxes and bearings with a high thermal load. In comparison with mineral industrial
gear oils a substantial extension of the oil drain interval is possible. This oil is
compatible with all seal materials and paints normally specified for use with mineral oils.
So no special change-over procedure is necessary.
Karakteristike
| Unit | Average Value | |
| Density at 15°C | kg/l | 0.857 |
| Viscosity 40°C | mm²/s | 320,00 |
| Viscosity 100°C | mm²/s | 39.90 |
| Viscosity index | 178 | |
| Flash point COC | °C | 260 |
| Pour point | °C | -42 |
| Acidity | mgKOH/g | 1.10 |
Pakovanje
 |
 |
 |
 |
|---|---|---|---|
| 20L | 60L | 210L | IBC |